IRSA Lackfabrik Irmgard Sallinger GmbH


Application areas

Products for application areas: Dielen


Z-157.10-143

DIBt-Zulassungsnummer: Nr. Z-157.10-143

IRSA 2C HP-Plus Oil, solvent free, with IRSA Hardener 2C HP-Plus (10:1)

For parquet and wooden flooring, for bamboo, cork and OSB,
in colorless, light sand, black, dark grey, light grey, white, wenge.

Extremely fast drying oil for every degree of wear and tear and non-film building, (re-oilable)

Also for use on IRSA Basic Color, IRSA Design Color Oil or IRSA Lye – with these IRSA products, unique, numerous and individual combination possibilities can be achieved!

From the professional only for the professional! Individuality as opposed to conformity!


Download the current flyer for IRSA 2K HP Plus Oil here


Z-157.10-31

DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.

Characteristics:

  • effective in regulating dampness
  • stain resistant
  • good penetrating properties
  • UV-resistant
  • gives the surface lustre
  • very little odour during application
  • odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats

(until the wood is completely saturated.)

Interim drying time 12 hrs.

Surplus oil should always be completed polished away.

Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.


Product in IRSA Shop

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, polish afterwards with Natura hard wax or maintenance oil.


Product in IRSA Shop

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Wood Seal 2010 VOC high solid silk matt

Ready-to-use 1 component alkyde resin sealing on the basis of herbal raw substances and de-aromatized solvents. In accordance with DIN 18032, part 2, it is also suitable for gyms and for normal and strong stress. Especially a few wood and laying types which tend to swell and shrink behaviour (e.g. beech parquet, boards, wood plaster floors), can be effectively protected with IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat.

H226 Flammable liquid and vapor. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam. Liq. 3, Skin Sens. 1, STOT SE 3

IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is also suitable for wood types which need a warm glowing of wood or which tend to discolourations if sealed with water varnish (smoked oak, cherry and other fruit wood).
The total consumption is at least 260 – max. 300g/m2.

1x IRSA Holzsiegel 2010 VOC High Solid silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is used undiluted as a primer. Drying of the primer is approximately 24 h. An interim sanding is carried out between primer and top coat.
1x IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is used as top coat.

The final hardness is achieved from 10 days on (at 20°C and 55% relative humidity)

Examples of use:
Living area with normal to strongly frequented rooms, corridors and stairs, wood paving, workshop floors, gymnasiums and sports halls.

With a VOC value of 499g/L, the new products IRSA Holzsiegel 2010 VOC High Solid/IRSA KH-Siegel VOC High Solid, silky-mat, fulfil the Deco Paint Guideline 2004, step 2, directive 500g/L VOC which is valid from 2010.

H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam., Liq. 3, Skin Sens. 1, STOT SE 3


Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.


Product in IRSA Shop

Z-157.10-32

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.


Product in IRSA Shop

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.


Product in IRSA Shop

IRSA Platinum 2C Öl-Grundierung+IRSA Platinum 2C Öl-Härter (MR: 10:1)

IRSA Platinum 2C Öl-Grundierung is a 2 component High-Solid oil combination of natural oils, linked and oxidatively-drying, by adding the IRSA 2C Oil Hardner.

Available in colourless, white, black, light grey, teak, anthracite, wenge, oak, mud/platin grey.
Special colours available on request.

Suitable for sanded wood and parquet floors, including boards, as well as finally sanded several layer parquet elements. The consumption is 30-80 g/m2 per application – depending on the absorbity of the wood.

The colour primer can be over-sealed with all IRSA Platinum 2C Water Varnishes
(IRSA Platinum 3010 silky-mat, IRSA Platinum 3030 ultra-matt, IRSA Platinum 3055 highly-shining seidenmatt, IRSA Platinum 2C Nature Feeling extreme-matt).

A 1x2C Oil Primer anthracite 3x Platinum 3030 2C Water Varnish ultra-matt
B 1x2C Oil Primer colourless 3x Platinum 3030 2C Water Varnish ultra-matt
C 1x2C Oil Primer white 3x Platinum 3030 2C Water Varnish ultra-matt
D 1x2C Oil Primer light grey 3x Platinum 3030 2C Water Varnish ultra-matt
E 1x2C Oil Primer wenge 3x Platinum 3030 2C Water Varnish ultra-matt
F 1x2C Oil Primer teak 3x Platinum 3030 2C Water Varnish ultra-matt
G 1x2KC Oil Primer oak 3x Platinum 3030 2C Water Varnish ultra-matt
H 1x2C Oil Primer black 3x Platinum 3030 2C Water Varnish ultra-matt
I 2C Oil Primer - 1 part colourless, 1 part anthracite
J 2C Oil Primer - 1 part colourless, 1 part mud
K 2C Oil Primer - 1part colours, 1 part light grey


Z-157.10-38

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 2C-Nature Feeling Parquet Water Varnish + Iso Hardener

extremely-matt

2Cpolyurethanewatervarnish with extremely matt look (20 pieces of varnish: 1 piece Platinum hardener).
Natural wood look!!!
Even with several sealing layers, the surface gets a very natural look due to its exceptional matt look of the sealing!
For normal to very strongly stressed parquet, wood and bamboo floors, OSB boards and stairs.
Caring and cleaning is carried out with IRSA Aqua Star R9 (diluted, has a matt effect).

IRSAPlatinumNatureFeeling2C Polyurethane Water Varnish is extremely matt and has a high filling capacity due to it s exceptional tear and scratch resistance. The sealing will not get yellow. The closed varnish film is still water-resistant after longer application time of water and convinces through its household chemical resistance.
IRSA Platinum Nature Feeling 2K- Polyurethane Water Varnish is extremely matt and is resistant to shoe heel marks.
The total use is at least 360 g/qm. Abrading is normally carried out before the last top layer is applied (at 20°degrees and 55% humiditiy).
Application of use:
Normally to strongly stressed floors in the living area, in open buildings, schools, offices, etc.


Z-157.10-37

DIBt-Zulassungsnummer: Nr. Z-157.10-37

IRSA PLATINUM 3000 1C water-based varnish for parquet

silk matt/ultra matt

Ready-to-use water-based varnish in silk matt or ultra matt finish. For normal to heavy duty wear on parquet, wood and bamboo floors, OSB boards and stairs. Further maintenance should be carried out using IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).

IRSA PLATINUM 3000 water-based varnish for parquet flooring in silk matt or ultra matt is highly resistant against wear and tear and scratches and displays excellent filling capacity. The sealing layer does not turn yellow. The closed varnish film is resistant against the effects of water over several hours and is convincing in its very good resistance to household chemicals. IRSA PLATINUM 3000 water-based varnish is not sensitive towards shoe heel marks. After 5 days the floor has reached its final hardness and can be subjected to full wear and tear.

Areas of application: Living areas, offices and kindergartens.


Product in IRSA Shop

Z-157.10-37

DIBt-Zulassungsnummer: Nr. Z-157.10-37

silk matt

IRSA PLATINUM 3001 1C- A ready-to-use polyurethane-water-based varnish. For normal wear and tear of parquet-, wood-, and bamboo floors, OSB boards and stairs. The further maintenance is carried out with IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).

IRSA PLATINUM 3001 1C- water-based varnish for parquet in silk matt is resistant to wear and tear and scratches with very good filling properties. The sealing layer is non-yellowing. IRSA PLATINUM 3001 1C- Water-Based Varnish is also non sensitive to the marks left by rubber soles. After the final hardness the treated floor is subject to wear and tear after 5 days. Application recommended in living areas.


Z-157.10-38

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3010 2C parquet water varnish + hardener

silk matt

2C polyurethane parquet water varnish in silk mat (20 components varnish: 1 component PLATINUM hardener)
Suitable for normal to very strongly stressed parquet, wood and bamboo floors, OSB boards and stairs.
According to DIN 18032, part 2 is tested. Therefore, it is also suitable for gyms.
Caring and cleaning is carried out with IRSA Aqua Star (self- shining) or with IRSA Aqua Star R9 (diluted, has a mat effect).

Beyond its exceptional tear and scratch resistance, IRSA Platinum 3010 2C polyurethane parquet water varnish has a high filling capacity. The sealing layer does not become yellow. The closed varnish film is also still water-resistant after longer exposure time to water and convinces with its good household chemical resistance.
3010 2C polyurethane parquet water varnish is resistant to shoe heel smears. Final hardness is achieved within 3 days (at 20° and 55% humidity).
Application areas: Very strongly stressed floors in open buildings, schools, offices, gyms and sports halls.

IRSA PLATINUM 2K Öl-Grundierung (7 standard colours) can be used as color primer Platinum Roll-on primer
(see PRODUCTS SPECIAL PRODUCTS)

 


Z-157.10-38

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3010 2C Parquet Water Lacquer + IRSA PLATINUM ISO-Hardener

(2C = two component)

2C polyurethane water-based varnish silk matt for parquet flooring silk (20 parts varnish : 1 part PLATINUM hardener).

For normal to very heavy duty wear on parquet, wood and bamboo floors, untreated cork, OSB boards and stairs.

Approved to DIN 18032 part 2 and therefore also suitable for sports halls.

Further maintenance and cleaning should be carried out using IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).

Due to its exceedingly good resistance to wear and tear and scratches IRSA PLATINUM 3010 2C polyurethane water-based varnish silk matt for parquet flooring demonstrates excellent filling properties. The sealing layer does not turn yellow. The closed varnish film is resistant against the effects of water over several hours and is convincing in its very good resistance to household chemicals.

3010 2C polyurethane water-based varnish is not sensitive to shoe heel marks.

Overall consumption rate lies at around at least 360-400g/m². An interim sanding is usually carried out before the final top coat or if necessary.

Final hardness is reached after 3 days ( at 20°C and 55% humidity).

Areas of application: Flooring subjected to exceedingly high traffic/well-trodden flooring in public buildings, schools, offices, gymnasiums and sports halls.

IRSA PLATINUM 2K Öl-Grundierung (7 standard colours) can be used as color primer Platinum Roll-on primer
(see PRODUCTS SPECIAL PRODUCTS)


Z-157.10-38

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3030 2C Parquet Water Lacquer ultra-matt + IRSA PLATINUM ISO-Hardener

(2C = two component)

2C polyurethane water-based varnish ultra matt effect for parquet floor, (almost) like untreated wood or untreated cork (20 parts varnish : 1 part PLATINUM hardener).

For normal to very heavy duty wear on parquet, wood, cork and bamboo floors, OSB boards and stairs.

Approved to DIN 18032 part 2 and therefore also suitable for sports halls.

Maintenance and cleaning carried out using IRSA Aqua Star R9 (diluted, matt effect).

Due to its exceedingly good resistance to wear and tear and scratches IRSA PLATINUM 3030 2C polyurethane water-based varnish ultra matt for parquet flooring demonstrates excellent filling properties. The sealing layer does not turn yellow. The closed varnish film is resistant against the effects of water over several hours and is convincing in its very good resistance to household chemicals.

3030 2C polyurethane water-based varnish is not sensitive to shoe heel marks. Final hardness is reached after 5-7 days ( at 20°C and 55% humidity).

Overall consumption rate lies at around at least 360-400g/m². An interim sanding is usually carried out before the final top coat or if necessary.

Areas of application: Normal to exceedingly well-trodden flooring in public buildings, schools, offices, gymnasiums and sports halls.

IRSA PLATINUM 2K Öl-Grundierung (7 standard colours) can be used as color primer Platinum Roll-on primer
(see PRODUCTS SPECIAL PRODUCTS)

IRSA PLATINUM 3055 2C water-based varnish for parquet + PLATINUM ISO Hardener 3055

high gloss

2C Polyurethane water-based varnish high gloss for Parquet Flooring (20 parts varnish : 1 part PLATINUM ISO hardener 3055) .

For normal to very heavy duty wear on parquet, wood and bamboo flooring, OSB boards and stairs.

The product is very resistant to wear and tear and scratching and displays great filling properties. The sealant layer does not turn yellow. The closed film of varnish is also non sensitive to the effects of water left on over hours and is convincing with its good resistance to household chemicals.

IRSA PLATINUM 3055 2C polyurethane water-based varnish high gloss for parquet is non sensitive to marks left by shoe heels. Final hardness is reached after 5 -7 days (at 20°C and 55% humidity).

Overall consumption rate lies at around at least 360-400g/m². An interim sanding (grain 180) is usually carried out before the final top coat or if necessary.

The maintenance and cleaning is carried out using IRSA Aqua Star (self glossing), and/or the first maintenance with IRSA Aqua Star GW.

Areas of application: flooring subjected to exceedingly heavy traffic in public buildings, offices and kindergartens.


Z-157.10-37 Z-157.10-38

DIBt-Zulassungsnummer: Nr. Z-157.10-37 Z-157.10-38

IRSA PLATINUM Roll-On Primer PLUS+

For parquet-, wood- and bamboo floors, OSB boards and stairs to preserve a warm glow of wood. IRSA PLATINUM Roll-On Primer PLUS+ is a water based polymer-dispersion. Available as roll-on or brush-on primer for all IRSA PLATINUM and IRSA water based top coats.

Apply IRSA PLATINUM Roll-On Primmer PLUS+ 1x in roll-on or brush-on process, approx. 100 g/m² depending on the absorptive capacity of the wood. Drying time for priming approx. 2 hours.


Product in IRSA Shop

Back to overview