Parquet Oil

IRSA Hard Wax Oil OPUS, satin, matt

Oiling without sanding and polishing

For wood surfaces, parquet, cork, OSB surfaces, bamboo and other absorbent surfaces indoors

• ready for use
• durable, easy-care surface
• has a moisture-regulating effect, is water and dirt repellent
• gives the surface brilliance
• is low-odor during processing, odorless after drying.
• IRSA Hard Wax Oil Opus gives good kindling (enhances the color intensity of wood, cork, bamboo, etc.)
• available in the gloss levels satin (approx. 25) and matt (approx. 3)

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.

DIBt-Zulassungsnummer: Nr. Z-157.10-143

IRSA 2C HP-Plus Oil, solvent free, colourless/coloured, with IRSA Hardener 2C HP-Plus (10:1)

For parquet and wooden flooring, for bamboo, cork and OSB,
in colorless, light sand, black, dark grey, light grey, white, wenge.

Extremely fast drying oil for every degree of wear and tear and non-film building, (re-oilable)

Also for use on IRSA Basic Color, IRSA Design Color Oil or IRSA Lye – with these IRSA products, unique, numerous and individual combination possibilities can be achieved!

From the professional only for the professional! Individuality as opposed to conformity!

Download the current flyer for IRSA 2K HP Plus Oil here

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, wax afterwards with Natura hard wax.

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.

DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil, coloured/colourless

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.

Characteristics:

• effective in regulating dampness
• stain resistant
• good penetrating properties
• UV-resistant
• gives the surface lustre
• very little odour during application
• odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats (until the wood is completely saturated.)

Interim drying time 12 hrs. Surplus oil should always be completed polished away. Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.