Parquet Machines, Tools & Accessories

Traditional abrasives

unbeatably economical

• convincing quality is achieved due to the use of tough cotton fibres as a base material and high quality synthetic resin binding agent.
• perfect sanding finish and high durability as a result of the optimal distribution of the sanding particles.
• unbeatable cost/performance ratio

Zirconia-Alumina sanding agent

high performance quality

• polyester-reinforced base material provides exceptional stability
• very high removal rate (even with little sanding pressure)
• very high durability, low consumption

Velcro sanding discs 200 mm

Diameter: 200 mm, cloth
Zirkonkorund
Grit:

Normal pads, super pads, hand pads

IRSA Pads and their uses:
white = to polish/maintain waxed surfaces
beige = to treat oiled/to clean waxed surfaces
green = to remove wax layers/cleaning

Traditional abrasives

unbeatably economical

• convincing quality is achieved due to the use of tough cotton fibres as a base material and high quality synthetic resin binding agent.
• perfect sanding finish and high durability as a result of the optimal distribution of the sanding particles.
• unbeatable cost/performance ratio

IRSA Professional Brush

Using the IRSA Professional Brush, surfaces such as floor board elements can be oiled efficiently on all sides.

Rapid Spatula

The rust-free Rapid Spatula with its rounded edges is best to use for filling/smoothing e.g. watery varnishes.

Varnishes containing solvent and also oils are ideally applied using the IRSA Mohair Roller. The sealing roller is 25 cm wide and made of pure goats hair.
Suitable for 8 mm arm.

Hard Oil Wiper

With the Hard Oil Wiper excess oil can be removed easily and quickly.

IRSA Blitzboy & accessories

Universal IRSA cleaning and maintenance appliance for all types of flooring:
IRSA BLITZBOY is excellently suited as a tool for the cleaning and maintenance of all varnished, water-proofed and/or oiled or waxed surfaces, for applying IRSA products and for polishing.

Due to the velcro strips on the underside of the IRSA Blitzboy different pads can be affixed quickly. The oil cloths and/or the special long-life IRSA Mopping Cloth (no abrasive microfibers) can be fixed easily by tucking them in on the upper side.

In addition to the IRSA Maintenance instructions we also offer, free of charge, a certificate of quality „Floor Protection-Pass"

BSM 750S

The belt sanding machine BSM 750 S is convincing because of its ideal sanding quality and tremendous power output.

Thanks to its heavy weight and powerful motor this parquet flooring machine guarantees an efficient operation method. The long-lasting technology ensures high cost effectiveness. The continuous rolling pressure control, the robust sanding roller, which combine powerful work with high engine smoothness, as well as the automatic belt centering device facilitate ideal sanding results The innovative automatic motor start-up guarantees that the motor starts even under critical electrical conditions.

When working in the vicinity of walls or skirting boards the variable distance piece prevents that these get damaged by the band sanding machine. The parquet flooring machine BSM 750 S can be dismantled easily into three parts so that transportation is simplified

Single phase-AC current motor
Voltage: 230 V ~ 50 Hz
Input: 2.500 W
Sanding roller revs:approx. 2.000revs/min
Sanding roller width: 200 mm
Sanding belt length: 750 mm
Weight: 85 kg

BSM 750E

Single phase AC current motor
Voltage: 230 V ~ 50 Hz
Input: 2.200 W
Sanding roller revs: approx. 2.400 revs/min
Sanding roller width: 200 mm
Sanding belt length: 750 mm
Weight: 67 kg

Description otherwise as BSM 750S.

RSM 150

The edge sanding machine RSM 150 is the ideal addition to the belt sanding machine in the BSM 750-series. Due to its handy size it is particularly suited for sanding edges, corners and steps. The RSM 150 is suitable for screw-on or velcro sanding discs which can be simply and quickly changed.

The parquet flooring machine has a robust motor and an excellent integrated dust extraction to limit dust while working. Using the optional long attachment, work in tricky to reach areas e.g. under radiators, is possible. Thanks to the freely swivelling vacuum tube on the edge sanding machine even working in very tight conditions is not hindered by the dust sack.

Single phase AC current motor
Voltage: 230 V ~ 50 Hz
Input: 920 W
Sanding plate revs: approx. 3.400 revs/min
Sanding plate diameter: 150 mm
Attachment short: 377 mm (in scope of supply)
Attachment long: 481 mm
Weight: 10 kg

ESM 406

The one disc sanding machine ESM 406 stands for the best sanding quality for the simplest, most comfortable handling. The solid body and the long-life, strong motor enable efficient working - from the removal of adhesive remains and from the sanding of filler or concrete ,over the fine sanding and interim sanding of varnish right up to the application of oils.

Due to the additional weight included in the scope of supply, the sanding pressure can be individually adjusted so that the very best sanded surface can be achieved. Hence the parquet flooring sanding machine IRSA ESM 406 can also be utilized for difficult flooring. The adjustable handle makes it possible to adjust the one disc sanding machine to suit the height of the person using it and the integrated safety switch prevents the machine from being switched on accidently.

Single phase AC current motor
Voltage: 230 V ~ 50 Hz
Input: 1.200 W
Sanding plate revs under load: approx. 150 revs/min
Sanding plate diameter: 406 mm
Machine weight: 32 kg
Additional weight: 12,5 kg
Turning plate for sanding discs
Turning plate for sanding pads
Turning plate for velcro sanding discs