IRSA Lackfabrik Irmgard Sallinger GmbH


PRODUCTS


Z-157.10-37

DIBt-Zulassungsnummer: Nr. Z-157.10-37

silk matt

IRSA PLATINUM 3001 1C- A ready-to-use polyurethane-water-based varnish. For normal wear and tear of parquet-, wood-, and bamboo floors, OSB boards and stairs. The further maintenance is carried out with IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).

IRSA PLATINUM 3001 1C- water-based varnish for parquet in silk matt is resistant to wear and tear and scratches with very good filling properties. The sealing layer is non-yellowing. IRSA PLATINUM 3001 1C- Water-Based Varnish is also non sensitive to the marks left by rubber soles. After the final hardness the treated floor is subject to wear and tear after 5 days. Application recommended in living areas.

Our product range

Products for application areas: Cotto


Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, polish afterwards with Natura hard wax or maintenance oil.


Product in IRSA Shop

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.


Product in IRSA Shop
Back to overview