Staircases

Products for application areas: Staircases

DIBt-Zulassungsnummer: Nr. Z-157.10-143

IRSA 2C HP-Plus Oil, solvent free, colourless/coloured, with IRSA Hardener 2C HP-Plus (10:1)

For parquet and wooden flooring, for bamboo, cork and OSB,
in colorless, light sand, black, dark grey, light grey, white, wenge.

Extremely fast drying oil for every degree of wear and tear and non-film building, (re-oilable)

Also for use on IRSA Basic Color, IRSA Design Color Oil or IRSA Lye – with these IRSA products, unique, numerous and individual combination possibilities can be achieved!

From the professional only for the professional! Individuality as opposed to conformity!

Download the current flyer for IRSA 2K HP Plus Oil here

DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil, coloured/colourless

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.

Characteristics:

• effective in regulating dampness
• stain resistant
• good penetrating properties
• UV-resistant
• gives the surface lustre
• very little odour during application
• odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats (until the wood is completely saturated.)

Interim drying time 12 hrs. Surplus oil should always be completed polished away. Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, wax afterwards with Natura hard wax.

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Holzsiegel 2010 VOC High Solid, silky-mat (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat (IRSA KH-Sealer 2010 VOC High Solid)

Ready-to-use 1-component alkyde resin sealant based on vegetable raw materials and de-aromatised solvents.

Tested in accordance with DIN 18032 Part 2. Therefore, they are also suitable for gymnasiums and sports halls.

For normal and heavy stress. Especially some types of wood and installation that tend to swell and shrink more (e.g. beech parquet, floorboards, wood paving) can be effectively protected with IRSA Holzsiegel 2010 VOC High Solid, silky-mat (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat (IRSA KH-Sealer 2010 VOC High Solid).

H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam. Liq. 3, Skin Sens. 1, STOT SE 3

IRSA Holzsiegel 2010 VOC High Solid, silky-mat (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, (IRSA KH-Sealer 2010 VOC High Solid) is also suitable for wood types which should receive a warm glowing of wood or that tend to discolour when further sealed with water-based varnish (smoked oak, cherry or other fruit wood).

The total consumption is at least 260 - max. 300g/m2.

1x IRSA Holzsiegel 2010 VOC High Solid, silky-mat (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat (IRSA KH-Sealer 2010 VOC High Solid) is used undiluted as a primer. Drying of the primer is at least 24h. Interim sanding is carried out between priming and top coat. 1x IRSA Holzsiegel 2010 VOC High Solid, silky-mat (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat (IRSA KH-Sealer 2010 VOC High Solid) is used as top coat.

Final hardness is achieved after 10 days (at 20°C and 55% humidity).

Areas of use: Living areas with normal to highly frequented rooms, corridors and stairs, wooden paving, workshop floors, gymnasiums and sports halls.

The new products IRSA Holzsiegel 2010 VOC High Solid (IRSA Wood Sealer 2010 VOC High Solid)/IRSA KH-Siegel 2010 VOC High Solid, silky-mat (IRSA KH-Sealer 2010 VOC High Solid) fulfil the Decopaint Directive 2004 Stage 2, limit value 500g/L VOC, which is valid from 2010, with a VOC value of 499g/L.

H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam. Liq. 3, Skin Sens. 1, STOT SE 3

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 2C Nature Feeling Parquet Water Varnish + Platinum Iso Hardner, extreme-mat

extreme-mat

2C polyurethane Water-Based Parquet Varnish, extreme-mat (20 parts varnish:1 part Platinum Iso Hardener).

Extreme mat appearance, natural wood look!! (20 parts varnish:1 part Iso Hardener, extreme mat).

The surface has a very natural look - even with many layers of sealant – due to the exceptional mat finish of the sealing! For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Care and maintenance is carried out with IRSA Aqua Star R9 (diluted, mat effect).

IRSA Platinum Nature Feeling 2-component polyurethane Water-Based Parquet Varnish, extreme-mat, has a high filling capacity, additionally to its extraordinary wear and scratch resistance. The sealing layer does not get yellow. The closed varnish film is water-resistant even after prolonged exposure to water and convinces with its good resistance to household chemicals.

IRSA Platinum Nature Feeling 2C polyurethane Water-Based Parquet Varnish, extreme mat, is insensitive to shoe heel marks.

The total consumption is at least 360g/m2. Interim sanding is usually carried out before the last top layer (at 20°C and 55% humidity).

Areas of use: Normal to very heavily stressed floors in residential areas, public buildings, schools, offices, etc.

IRSA Platinum 2C Nature Feeling, extreme mat
Contains 1,2-benzisothiazole-3(2H)-on, mixture of: 5-chlor-2-methyl-2H-isothiazole-3-one [EG No. 247-500-7] and 2-methyl-2H-isothiazole-3-one [EG No. 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum Iso Hardener, extreme mat
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Acute Tox. 4, Skin Sens. 1, STOT SE 3, Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

DIBt-Zulassungsnummer: Nr. Z-157.10-37

IRSA PLATINUM 3000 1C Parquet Water Varnish

silky-mat and ultra-mat

Ready-to-use polyurethane water-based varnish in 2 gloss levels: silky-mat and ultra-mat For normal to heavily used parquet, wood and bamboo floors, OSB boards and stairs. Further care is carried out with IRSA Aqua Star (self-shining) or IRSA Aqua Star R9 (diluted, mat effect).

IRSA Platinum 3000 1C Water-Based Parquet Varnish is very wear and scratch resistant and shows a high level of filling capacity. The sealing layer does not get yellow. The closed varnish film is water-resistant - even after prolonged exposure to water and convinces with its good resistance to household chemicals.

IRSA Platinum 3000 1C Water-Based Parquet Varnish is insensitive to shoe heel marks.

The floor can be quickly stressed (at 20 °C and 55% humidity), as the final hardness is already reached after 3 days.

Areas of use: e.g. living area, offices

Contains 1,2-Benzisothiazole-3(2H)-on. May cause allergic reactions.

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3010 2C Parquet Water Varnish + IRSA Platinum Iso Hardener 3010/3030

silky-mat

2-component polyurethane water-based parquet varnish, silky-mat (20 parts varnish:1 part PLATINUM Iso Hardener 3010/3030) For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Tested in accordance with DIN 18032, Part 2. Therefore, it is also suitable for gymnasiums.

Care and maintenance is carried out with IRSA Aqua Star (self-shining) or with IRSA Aqua Star R9 (diluted, mat effect).

IRSA Platinum 3010 2-component polyurethane Water-Based Parquet Varnish, silky-mat, has a high level of filling capacity, additionally to its extraordinary wear and scratch resistance. The sealing layer does not get yellow. The closed varnish film is water-resistant -even after prolonged exposure to water and convinces with its good resistance to household chemicals.

3010 2C polyurethane Water-Based Parquet Varnish is insensitive to shoe heel marks. Final hardness is achieved after 3 days (at 20°C and 55% humidity)

Areas of use: very heavily stressed floors in public buildings, schools, offices, gymnasiums and sports halls.

IRSA Platinum 3010/3030 2C Parquet Water Varnish
Contains 1,2-benzisothiazole-3(2H)on, mixture of: 5-chlor-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2methyl-2H-isothiazole-3-on [EG No 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum ISO Hardener 3010/3030
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Acute Tox. 4, Skin Sens. 1, STOT SE 3, Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3010 2C Parquet Water Varnish Antislip R10 + Platinum Iso Hardener 3010/3030 (20 parts varnish:1 part PLATINUM Iso Hardener 3010/3030)

(2C = two component)

The IRSA Platinum 3010 2-component Water-Based Parquet Water Varnish Antislip R10 meets the requirements of BGR 181 and DIN 51130 for slip resistance class R10.

For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Care and maintenance is carried out with IRSA Aqua Star R9 (diluted).

IRSA Platinum 3010 2-Component Parquet Water Varnish Anti-Slip R10 has a high filling capacity, additionally to its extraordinary wear and scratch resistance. The sealing layer does not get yellow. The closed varnish film is water-resistant - even after prolonged exposure to water and convinces with its good resistance to household chemicals. 3010 2C Water-Based Parquet Varnish Anti-Slip R10 is insensitive to shoe heel marks. Final hardness is achieved after 3 days (at 20°C and 55% humidity).

Areas of use: Very heavilyy stressed floors in public buildings, schools, offices.

IRSA Platinum 3010 2C Parquet Water Varnish Antislip
Contains 1,2-benzisothiazole-3(2H)-on, mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum ISO Hardener 3010/3030
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Acute Tox. 4, Skin Sens. 1, STOT SE 3, Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3030 2C Parquet Water Varnish – Platinum Iso Hardener 3010/3030

ultra-mat

2-component polyurethane Water-Based Parquet Varnish, ultra-mat, (almost) like untreated wood or untreated cork (20 parts varnish:1 part Platinum Iso Hardener 3010/3030)

For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Tested in accordance with DIN 18032, Part 2. Therefore, it is also suitable for gymnasiums.

Care and maintenance is carried out with IRSA Aqua Star R9 (diluted, mat effect).

IRSA Platinum 3030 2-Component Polyurethane Water-Based Parquet Varnish, ultra-mat, has a high filling capacity, additionally to its extraordinary wear and scratch resistance. The sealing layer does not get yellow. The closed varnish film is water-resistant - even after prolonged exposure to water and convinces with its good resistance to household chemicals.

IRSA Platinum 3030 2-component polyurethane Water-Based Parquet Varnish is insensitive to shoe heel marks.

The total consumption is at least 360g/m2. Interim sanding is usually carried out before the last top layer (at 20°C and 55% humidity).

Areas of use: Normal to very heavilyy stressed floors in public buildings, schools, offices, gymnasiums and sports halls

IRSA Platinum 3030 2C Parquet Water Varnish:
Contains 1,2-benzisothiazole-3(2H)-on, mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum ISO Hardener 3010/3030
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Acute Tox. 4, Skin Sens. 1, STOT SE 3, Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

IRSA Platinum 3055 2C Parquet Water Varnish + Platinum ISO Hardener 3055, highly gloss

highly gloss

2K polyurethane Water-Based Parquet Varnish, highly gloss (20 parts varnish:1 part Platinum ISO Hardener 3055).

For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Care and maintenance is carried out with IRSA Aqua Star (self-shining) or with IRSA Aqua Star GW.

IRSA Platinum 3055 2-component polyurethane Water-Based Parquet Varnish, highly gloss, has a high filling capacity, additionally to its extraordinary wear and scratch resistance. The closed varnish film is water-resistant - even after prolonged exposure to water and convinces with its good resistance to household chemicals.

IRSA Platinum 3055 2-Component Polyurethane Parquet Water Varnish, highly gloss, is resistant to shoe heel marks. Final hardness is achieved after 5 days (at 20°C and 55% humidity).

The total consumption is at least 360g/m2. Interim sanding is usually carried out before the last top layer.

Areas of use: very highly frequented floors in public areas, offices, kindergartens. IRSA Platinum 3055 2C Parquet Water Varnish, highly gloss

Contains 1,2-benzisothiazole-3(2H)-on, mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2-methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum ISO Hardener 3055
H332 Harmful if inhaled. H315 Causes skin irritation. H318 Causes serious eye damage. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects.

Acute Tox. 4, Skin Irrit. 2, Skin Sens. 1, STOT SE 3,

Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

IRSA Uni Primer AL

Alcohol-based primer for exotic and domestic woods (also for fruit wood); can be painted over with all IRSA Platinum water-based paints

IRSA Uni Primer AL is suitable for all domestic woods as well as exotic woods and isolates most of the wood components.

Preserves the natural wood tone. With the primer a natural grain is achieved.

Warnings: H225 Highly flammable liquid and vapour, H319 Causes severe eye irritation, H336 May cause drowsiness and dizziness; safety advice: P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke, P370 + P378 In case of fire: Use dry powder or sand to extinguish, P403 + P233 Keep in a well-ventilated place. Keep container tightly closed, P403 + P235 Store in a well-ventilated place. Keep cool; Hazard-determining component for labelling: 2-propanol.