Cork

Products for application areas: Cork

DIBt-Zulassungsnummer: Nr. Z-157.10-143

IRSA 2C HP-Plus Oil, solvent free, colourless/coloured, with IRSA Hardener 2C HP-Plus (10:1)

For parquet and wooden flooring, for bamboo, cork and OSB,
in colorless, light sand, black, dark grey, light grey, white, wenge.

Extremely fast drying oil for every degree of wear and tear and non-film building, (re-oilable)

Also for use on IRSA Basic Color, IRSA Design Color Oil or IRSA Lye – with these IRSA products, unique, numerous and individual combination possibilities can be achieved!

From the professional only for the professional! Individuality as opposed to conformity!

Download the current flyer for IRSA 2K HP Plus Oil here

IRSA Aqua Kork Extra, mat

for normal to heavy stress

IRSA Aqua Cork, mat, is a highly elastic, ready-to-use polyurethane dispersion with high filling power and very good durability, especially developed for cork coverings. The swelling of some cork types is largely avoided with Aqua Kork Extra. This light-fast water-based varnish is also ideal for light-coloured cork.

The colouring can easily be carried out with IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer).

IRSA Aqua Cork Extra, mat, is applied to the cork in 3 layers (per layer approx. 120g/m2). The total consumption of IRSA Aqua Cork Extra is about 360 g/m2. Interim sanding is usually carried out before the last top layer.

The final hardness is achieved after 5 days (at 20°C and 55% humidity).

Please refer to our detailed Care Instructions, Technical Data Sheets and Safety Material Data Sheets (see download).

Contains mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2-methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

Here are our processing tips:
Cork colouring with new IRSA colours of IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) and new Cork Water Varnish IRSA Aqua Cork, extra mat!

IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) is not only suitable for wood, but also for the coloured design of cork. IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) is a 2-component high-solid oil combination with natural oils, cross-linking and oxidative drying, by adding IRSA 2C Oil Hardener (mixing ratio 10:1).

IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) is available in the colours white, black, light grey, teak, anthracite, wenge, oak, mud, colourless. Brand new in the program are amber, wild green, porcelain blue, green-grey, cashmere white. And of course we also offer special tones on request.

The cork, which is very easily dyed with IRSA Platinum 2C Öl-Grundierung can then be over-sealed just as easily. Even large areas can be dyed quickly and easily.

The new IRSA Aqua Cork Extra, mat, but also the IRSA Platinum 2C Water-based Varnishes (IRSA Platinum 2C Water-based Varnish 3010, silky-mat, Platinum 2K Water-based Varnish 3030, ultra-mat) are perfectly suited for this purpose. These varnish systems are matched to the highest level of elasticity of the cork and do not only promise a long lifetime but also give visually attractive qualities.

And so the IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) and new cork water varnish IRSA Aqua Cork extra (mat) is applied as follows:

IRSA Platinum 2C Öl-Grundierung (IRSA Platinum 2C Oil Primer) is applied evenly to the substrate in cross-coats with IRSA Rapid Spatula (consumption: approx. 30 - 80g/m2 per application). The pot life is 2 hours! After 10 - 30 minutes, polish the excess completely and evenly into the cork with a white pad, allow to dry for at least 24 hours and the surface is ready for over-sealing!

Check that the oil is sufficiently dry before sealing. Rub the coloured cork surface with a paper towel. If no abrasion can be detected, then the surface is dry (it is best to use dark cloths for light surfaces and light cloths for dark surfaces).

The over-sealing is as usual: Apply 2-3 coats of 120g/m2 per coat with the new cork Water-Based IRSA Aqua Kork, extra (or with IRSA Platinum 2C Water-based Varnish 3010, silky-mat, Platinum 2C Water-based Varnish 3030, ultra-mat). If a layer has a drying time of more than 12 hours, interim sanding with a grain size of 150 must be carried out. The hardening time is about 5 days.

Care and maintenance for a long product life and optimized appearance: The subsequent care and maintenance after the hardening time of the overcoat is carried out with IRSA Aqua Star R9 (for mat surfaces), so that the beautiful mat surface remains mat for a long time. Please follow our IRSA Aqua Star R9 Care Instructions (for request or download see www.irsa.de/download).

IRSA AQUA CORK PLUS

silky-mat

Has successfully been used for over 25 years for normal to very heavy stress!

IRSA Aqua Kork Plus, silky-mat, is a highly elastic, ready-to-use pure polyurethane dispersion with high filling power and extraordinary durability, especially developed for cork coverings. The swelling of some cork types is largely avoided with IRSA Aqua Kork Plus. This lightfast water-based varnish is also ideal for dyed cork.

The total consumption is at least 360g/m2. Interim sanding is usually carried out before the last top layer.

Final hardness is achieved after 5 days (at 20°C and 55% humidity).

Contains mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2-methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

Areas of use: Offices, kindergartens, schools, public buildings.

DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil, coloured/colourless

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.

Characteristics:

• effective in regulating dampness
• stain resistant
• good penetrating properties
• UV-resistant
• gives the surface lustre
• very little odour during application
• odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats (until the wood is completely saturated.)

Interim drying time 12 hrs. Surplus oil should always be completed polished away. Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, wax afterwards with Natura hard wax.

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.

IRSA Cork Clean

for sealed cork flooring and sealed cork pre-finished parquet (self glossing)
Ingredients [PDF]

Use as a maintenance and cleaning agent diluted in the cleaning water. No polishing necessary.

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.

IRSA Platinum 2C Öl-Grundierung+IRSA Platinum 2C Öl-Härter (MR: 10:1)

IRSA Platinum 2C Öl-Grundierung is a 2 component High-Solid oil combination of natural oils, linked and oxidatively-drying, by adding the IRSA 2C Oil Hardner.

Available in colourless, white, black, light grey, teak, anthracite, wenge, oak, mud/platin grey.
Special colours available on request.

Suitable for sanded wood and parquet floors, including boards, as well as finally sanded several layer parquet elements. The consumption is 30-80 g/m2 per application – depending on the absorbity of the wood.

The colour primer can be over-sealed with all IRSA Platinum 2C Water Varnishes
(IRSA Platinum 3010 silky-mat, IRSA Platinum 3030 ultra-matt, IRSA Platinum 3055 highly-shining seidenmatt, IRSA Platinum 2C Nature Feeling extreme-matt).

A 1x2C Oil Primer anthracite 3x Platinum 3030 2C Water Varnish ultra-matt
B 1x2C Oil Primer colourless 3x Platinum 3030 2C Water Varnish ultra-matt
C 1x2C Oil Primer white 3x Platinum 3030 2C Water Varnish ultra-matt
D 1x2C Oil Primer light grey 3x Platinum 3030 2C Water Varnish ultra-matt
E 1x2C Oil Primer wenge 3x Platinum 3030 2C Water Varnish ultra-matt
F 1x2C Oil Primer teak 3x Platinum 3030 2C Water Varnish ultra-matt
G 1x2KC Oil Primer oak 3x Platinum 3030 2C Water Varnish ultra-matt
H 1x2C Oil Primer black 3x Platinum 3030 2C Water Varnish ultra-matt
I 2C Oil Primer - 1 part colourless, 1 part anthracite
J 2C Oil Primer - 1 part colourless, 1 part mud
K 2C Oil Primer - 1part colours, 1 part light grey

DIBt-Zulassungsnummer: Nr. Z-157.10-38

IRSA PLATINUM 3030 2C Parquet Water Varnish – Platinum Iso Hardener 3010/3030

ultra-mat

2-component polyurethane Water-Based Parquet Varnish, ultra-mat, (almost) like untreated wood or untreated cork (20 parts varnish:1 part Platinum Iso Hardener 3010/3030)

For parquet, wood and bamboo floors, OSB boards and stairs which are exposed to normal to very heavy stress.

Tested in accordance with DIN 18032, Part 2. Therefore, it is also suitable for gymnasiums.

Care and maintenance is carried out with IRSA Aqua Star R9 (diluted, mat effect).

IRSA Platinum 3030 2-Component Polyurethane Water-Based Parquet Varnish, ultra-mat, has a high filling capacity, additionally to its extraordinary wear and scratch resistance. The sealing layer does not get yellow. The closed varnish film is water-resistant - even after prolonged exposure to water and convinces with its good resistance to household chemicals.

IRSA Platinum 3030 2-component polyurethane Water-Based Parquet Varnish is insensitive to shoe heel marks.

The total consumption is at least 360g/m2. Interim sanding is usually carried out before the last top layer (at 20°C and 55% humidity).

Areas of use: Normal to very heavilyy stressed floors in public buildings, schools, offices, gymnasiums and sports halls

IRSA Platinum 3030 2C Parquet Water Varnish:
Contains 1,2-benzisothiazole-3(2H)-on, mixture of: 5-chlor-2-methyl-2H-isothiazole-3-on [EG No. 247-500-7] and 2methyl-2H-isothiazole-3-on [EG No. 220-239-6] (3:1). May cause allergic reactions.

IRSA Platinum ISO Hardener 3010/3030
H332 Harmful if inhaled. H317 May cause an allergic skin reaction. H335 May cause respiratory irritation. H412 Harmful to aquatic life with long lasting effects. Acute Tox. 4, Skin Sens. 1, STOT SE 3, Aquatic Chronic 3. Contains isocyanates. May cause allergic reactions.

IRSA Uni Primer AL

Alcohol-based primer for exotic and domestic woods (also for fruit wood); can be painted over with all IRSA Platinum water-based paints

IRSA Uni Primer AL is suitable for all domestic woods as well as exotic woods and isolates most of the wood components.

Preserves the natural wood tone. With the primer a natural grain is achieved.

Warnings: H225 Highly flammable liquid and vapour, H319 Causes severe eye irritation, H336 May cause drowsiness and dizziness; safety advice: P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke, P370 + P378 In case of fire: Use dry powder or sand to extinguish, P403 + P233 Keep in a well-ventilated place. Keep container tightly closed, P403 + P235 Store in a well-ventilated place. Keep cool; Hazard-determining component for labelling: 2-propanol.