IRSA Lackfabrik Irmgard Sallinger GmbH


Application areas

Products for application areas: Holzpflaster


Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, polish afterwards with Natura hard wax or maintenance oil.


Product in IRSA Shop

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Wood Seal 2010 VOC high solid silk matt

Ready-to-use 1 component alkyde resin sealing on the basis of herbal raw substances and de-aromatized solvents. In accordance with DIN 18032, part 2, it is also suitable for gyms and for normal and strong stress. Especially a few wood and laying types which tend to swell and shrink behaviour (e.g. beech parquet, boards, wood plaster floors), can be effectively protected with IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat.

H226 Flammable liquid and vapor. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam. Liq. 3, Skin Sens. 1, STOT SE 3

IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is also suitable for wood types which need a warm glowing of wood or which tend to discolourations if sealed with water varnish (smoked oak, cherry and other fruit wood).
The total consumption is at least 260 – max. 300g/m2.

1x IRSA Holzsiegel 2010 VOC High Solid silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is used undiluted as a primer. Drying of the primer is approximately 24 h. An interim sanding is carried out between primer and top coat.
1x IRSA Holzsiegel 2010 VOC High Solid, silky-mat/IRSA KH-Siegel 2010 VOC High Solid, silky-mat, is used as top coat.

The final hardness is achieved from 10 days on (at 20°C and 55% relative humidity)

Examples of use:
Living area with normal to strongly frequented rooms, corridors and stairs, wood paving, workshop floors, gymnasiums and sports halls.

With a VOC value of 499g/L, the new products IRSA Holzsiegel 2010 VOC High Solid/IRSA KH-Siegel VOC High Solid, silky-mat, fulfil the Deco Paint Guideline 2004, step 2, directive 500g/L VOC which is valid from 2010.

H226 Flammable liquid and vapour. H317 May cause an allergic skin reaction. H336 May cause drowsiness or dizziness. Flam., Liq. 3, Skin Sens. 1, STOT SE 3


Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.


Product in IRSA Shop

Z-157.10-32

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.


Product in IRSA Shop

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.


Product in IRSA Shop
Back to overview