Multilayer parquet elements (finished parquet)

Products for application areas: Multilayer parquet elements (finished parquet)


Z-157.10-143

DIBt-Zulassungsnummer: Nr. Z-157.10-143

IRSA 2C HP-Plus Oil, solvent free, colourless/coloured, with IRSA Hardener 2C HP-Plus (10:1)

For parquet and wooden flooring, for bamboo, cork and OSB,
in colorless, light sand, black, dark grey, light grey, white, wenge.

Extremely fast drying oil for every degree of wear and tear and non-film building, (re-oilable)

Also for use on IRSA Basic Color, IRSA Design Color Oil or IRSA Lye – with these IRSA products, unique, numerous and individual combination possibilities can be achieved!

From the professional only for the professional! Individuality as opposed to conformity!


Download the current flyer for IRSA 2K HP Plus Oil here


 Order now - with IRSA-Professional advice

Z-157.10-31

DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil, coloured/colourless

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.

Characteristics:

  • effective in regulating dampness
  • stain resistant
  • good penetrating properties
  • UV-resistant
  • gives the surface lustre
  • very little odour during application
  • odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats (until the wood is completely saturated.)

Interim drying time 12 hrs. Surplus oil should always be completed polished away. Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.


 Buy now in IRSA Shop!

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid

colourless

is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, wax afterwards with Natura hard wax.


 Buy now in IRSA Shop!

Z-157.10-92

DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.


 Buy now in IRSA Shop!

Z-157.10-32

DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil

colourless

is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.


 Buy now in IRSA Shop!

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.


 Buy now in IRSA Shop!

IRSA Uni Primer AL

Alcohol-based primer for exotic and domestic woods (also for fruit wood); can be painted over with all IRSA Platinum water-based paints

IRSA Uni Primer AL is suitable for all domestic woods as well as exotic woods and isolates most of the wood components.

Preserves the natural wood tone. With the primer a natural grain is achieved.

Warnings: H225 Highly flammable liquid and vapour, H319 Causes severe eye irritation, H336 May cause drowsiness and dizziness; safety advice: P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke, P370 + P378 In case of fire: Use dry powder or sand to extinguish, P403 + P233 Keep in a well-ventilated place. Keep container tightly closed, P403 + P235 Store in a well-ventilated place. Keep cool; Hazard-determining component for labelling: 2-propanol.


 Order now - with IRSA-Professional advice
Back to overview

Please note

All specified drying times refer to 20° C and 55% relative humidity.
For further details please refer to our detailed care instructions, technical data sheets and safety data sheets (see Download).