Ihre professionelle Oberfläche
We see ourselves as an all-round supplier for surface protection and therefore also offer the following products:
Colour primer for IRSA water-based varnishes, IRSA varnishes containing solvent and IRSA HP-Oil High Protection. In the entire interior building IRSA Basic-Colour can be used on hard and soft wood (e.g. parquet and wooden flooring, as well as furniture). It is not suitable for very rich exotic types of wood. Always do a patch test first.
Colors left to right:
dark grey, light grey, darker white, white, warm grey, red and yellow
orange, oak, cognac, wenge, black, blue and green.
Special colours can be delivered to meet relevant enquiries.
In the Restaurant and Café Dallmayr 220m² of cottage oak parquet flooring and 220m² of herringbone oak parquet flooring have been stained using IRSA Basic Colour Special Tone and subsequently oiled with IRSA HP-OIL High-Protection.
How to use: IRSA BASIC COLOR is applied evenly with the IRSA Mohair-Varnish Roller and then rubbed in using the single disc machine and a white pad. IRSA BASIC COLOUR can also be used with the brush, the spray gun or the airmix-tool.
Thinning: IRSA BASIC COLOR is made ready-to-use. To lighten only use IRSA BASIC COLOR COLORLESS. Depending on the degree of lightening the resistance to light could be reduced. All colours can be mixed with each other.
Total consumption: approx. 5–8 m²/l or approx.160 g/m² according to the type of wood and the wood’s absorptive capacity.
Drying time: at least 12 hours. The drying times quoted are based on normal conditions (approx. +20° C and approx. 55 % relative humidity).
Priming and top coats: all IRSA water-based sealants, IRSA Uni Primer (solvent-based) and for oiled surfaces IRSA HP-Oil High-Protection or IRSA Design Colour Oil can be used. Light- coloured surfaces should only be treated using IRSA Uni Primer and non yellowing (light resistant) sealants.
IRSA Platinum 2C Öl-Grundierung is a 2 component High-Solid oil combination of natural oils, linked and oxidatively-drying, by adding the IRSA 2C Oil Hardner.
Available in colourless, white, black, light grey, teak, anthracite, wenge, oak, mud/platin grey.
Special colours available on request.
Suitable for sanded wood and parquet floors, including boards, as well as finally sanded several layer parquet elements. The consumption is 30-80 g/m2 per application – depending on the absorbity of the wood.
The colour primer can be over-sealed with all IRSA Platinum 2C Water Varnishes
(IRSA Platinum 3010 silky-mat, IRSA Platinum 3030 ultra-matt, IRSA Platinum 3055 highly-shining seidenmatt, IRSA Platinum 2C Nature Feeling extreme-matt).
A 1x2C Oil Primer anthracite 3x Platinum 3030 2C Water Varnish ultra-matt
B 1x2C Oil Primer colourless 3x Platinum 3030 2C Water Varnish ultra-matt
C 1x2C Oil Primer white 3x Platinum 3030 2C Water Varnish ultra-matt
D 1x2C Oil Primer light grey 3x Platinum 3030 2C Water Varnish ultra-matt
E 1x2C Oil Primer wenge 3x Platinum 3030 2C Water Varnish ultra-matt
F 1x2C Oil Primer teak 3x Platinum 3030 2C Water Varnish ultra-matt
G 1x2KC Oil Primer oak 3x Platinum 3030 2C Water Varnish ultra-matt
H 1x2C Oil Primer black 3x Platinum 3030 2C Water Varnish ultra-matt
I 2C Oil Primer - 1 part colourless, 1 part anthracite
J 2C Oil Primer - 1 part colourless, 1 part mud
K 2C Oil Primer - 1part colours, 1 part light grey
IRSA UV-BLOCKER is delivered as a ready-to-use primer. The product can be applied by rolling, painting or spraying. Longstanding protection, prevents darkening and yellowing on light woods like e.g. birch, fir, spruce, maple and above all pine. It also improves the wood’s lifespan and its ability to maintain its dimensions. Discolorations, caused by varying incidence of light are as far as possible greatly reduced e.g. on furniture and flooring (under carpet), on ceilings and wall-claddings, summer houses and wooden houses as well as on other types of out-side wood. A patch test is required.
3.600m² of maple cottage parquet flooring, primed with IRSA UV-Blocker (protects against yellowing and darkening) and then sealed with IRSA PLATINUM 2030 2C water-based varnish ultra matt for parquet flooring. Subsequent maintenance and cleaning using IRSA Aqua Star R9.
How to use: IRSA UV-Blocker can also be used industrially (on production lines). After the IRSA UV-Blocker has dried seal the surface with the corresponding IRSA oils, water-based varnishes or one of the other IRSA varnish systems. In out-door areas, wood at risk from blueness or fungi should be treated with IRSA IMPREGNATING PRIMER prior to the final coat.
Total consumption: according to the type of wood and the absorptive capacity of the base coat approx. 40 - 100 ml/m²
Drying time: according to the absorptive capacity of the wood, humidity and temperature approx. 12-24 hours. These specifications are based on ideal conditions of + 20° C and 55 % relative humidity.
for parquet-, wood- and cork floorings.
Different colours: pine/acacia/limba/obeche, mahogany dark/rio palisander, oak dark, oak light, white, spruce/fir tree/maple/birch tree/ash/hevea/white beech tree, cork/walnut tree/teak/iroko, beech tree/oregon-pine, walnut tree dark/wengé, meranti/makoré
An over-sealable, over-oilable and a joint sealant which can be over-grinded. Available in the colours beech-nature/light sand, nature oak, white, grey, black.
We deliver a desired RAL colour if at least 4 cartridges are purchased.
Basis: Acrylic acid esther – copolymer (water-free, isocyanate-free, silicon-free, low in emission, highly elastic.
IRSA Elasto-Fill is used for overwidth, representatively coloured joints (“appearance like a yacht“) in wood floors, parquet or laminate. IRSA Elasto-Fill ist auch idealer Kleber für Sockelleisten aus Holz. The product can be over-sealed with all IRSA Platinum water varnishes, IRSA Platinum 2C Öl-Grundierung and oils (not suitable for our alkyd resin varnishes) (IRSA KH-Siegel and IRSA Holzsiegel 2010). Of course, we also deliver the necessary and suitable round cord (this avoids the 3 flank adhesion; PU= 100mm im Karton, Ø 6mm, 8mm or 10mm available on request).
IRSA LYE is a ready to use one component lye solution.
Available colours: colourless, white, sand, antique, light grey and dark grey
IRSA Lye is well suitable for non yellowed or well sanded oak or soft wood (pine wood) in interior areas. Ideal for wooden flooring, floorboards, stairs, wall and ceiling panelling, furniture, glued wood tiles etc. It can be efficiently applied over large areas using special tooling (not metal objects) to achieve a lye appearance.
IRSA LYE emphasises the natural wood grain, has a short development time, and is odourless.
For the professional end treatment of soft wood surfaces treated with lye, the following tried and tested products are available, depending on the demands of wear and tear: IRSA HP-Oil, IRSA Design Colour Oil white, IRSA Soap Cleaner, IRSA Industry Hard Oil.
If the surface appears to be too rough, eventually finish the oiled floor with green pad and One Disc Sanding Machine.