Ihre professionelle Oberfläche
IRSA Lackfabrik Irmgard Sallinger GmbH
IRSA PLATINUM Water-based varnish system – a new and forward-looking product in the field of surface protection for parquet, wooden floors, OSB boards, bamboo and other surfaces.
For fast and environment-compatible joint filling, IRSA PLATINUM Aqua Filler should be used. This water-based joint filling solution is suitable for all types of wood and bamboo. Then finally the PLATINUM water-based varnish system is applied. According to the degree of wear and tear and the type of surface to be sealed, one of the various IRSA PLATINUM water-based varnish types should be used, as described below.
IRSA PLATINUM Aqua Filler is a watery dispersion to mix with wood, bamboo or cork sawdust.
The joint filler serves as a binding agent for wood, bamboo and cork sawdust. The mixed compound is used to close joints in parquet, wood and cork flooring. Quick drying time (approx. 30 mins), no discolouration of the wood, very good sanding properties and good adhesive strength distinguish this product. Very little shrinkage at the joints.
Follow-up treatment can be carried out with solvent-based varnishes, water-based varnishes and oils.
For parquet-, wood- and bamboo floors, OSB boards and stairs to preserve a warm glow of wood. IRSA PLATINUM Roll-On Primer PLUS+ is a water based polymer-dispersion. Available as roll-on or brush-on primer for all IRSA PLATINUM and IRSA water based top coats.
Apply IRSA PLATINUM Roll-On Primmer PLUS+ 1x in roll-on or brush-on process, approx. 100 g/m² depending on the absorptive capacity of the wood. Drying time for priming approx. 2 hours.
silk matt/ultra matt
Ready-to-use water-based varnish in silk matt or ultra matt finish. For normal to heavy duty wear on parquet, wood and bamboo floors, OSB boards and stairs. Further maintenance should be carried out using IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).
IRSA PLATINUM 3000 water-based varnish for parquet flooring in silk matt or ultra matt is highly resistant against wear and tear and scratches and displays excellent filling capacity. The sealing layer does not turn yellow. The closed varnish film is resistant against the effects of water over several hours and is convincing in its very good resistance to household chemicals. IRSA PLATINUM 3000 water-based varnish is not sensitive towards shoe heel marks. After 5 days the floor has reached its final hardness and can be subjected to full wear and tear.
Areas of application: Living areas, offices and kindergartens.
IRSA PLATINUM 3001 1C- A ready-to-use polyurethane-water-based varnish. For normal wear and tear of parquet-, wood-, and bamboo floors, OSB boards and stairs. The further maintenance is carried out with IRSA Aqua Star (self glossing) or IRSA Aqua Star R9 (diluted, matt effect).
IRSA PLATINUM 3001 1C- water-based varnish for parquet in silk matt is resistant to wear and tear and scratches with very good filling properties. The sealing layer is non-yellowing. IRSA PLATINUM 3001 1C- Water-Based Varnish is also non sensitive to the marks left by rubber soles. After the final hardness the treated floor is subject to wear and tear after 5 days. Application recommended in living areas.
2C Polyurethane water-based varnish high gloss for Parquet Flooring (20 parts varnish : 1 part PLATINUM ISO hardener 3055) .
For normal to very heavy duty wear on parquet, wood and bamboo flooring, OSB boards and stairs.
The product is very resistant to wear and tear and scratching and displays great filling properties. The sealant layer does not turn yellow. The closed film of varnish is also non sensitive to the effects of water left on over hours and is convincing with its good resistance to household chemicals.
IRSA PLATINUM 3055 2C polyurethane water-based varnish high gloss for parquet is non sensitive to marks left by shoe heels. Final hardness is reached after 5 -7 days (at 20°C and 55% humidity).
Overall consumption rate lies at around at least 360-400g/m². An interim sanding (grain 180) is usually carried out before the final top coat or if necessary.
The maintenance and cleaning is carried out using IRSA Aqua Star (self glossing), and/or the first maintenance with IRSA Aqua Star GW.
Areas of application: flooring subjected to exceedingly heavy traffic in public buildings, offices and kindergartens.
For normal to heavy duty wear and tear. Has been used successfully for over 25 years.
Non-fading, no yellowing.
IRSA Aqua Cork Plus silk matt is a ready-to-use pure polyurethane dispersion conceived especially for use on cork. It has high elasticity, good filling properties and an extremely high resistance to wear and tear.
With Aqua Cork Plus the surface swelling of many cork types is largely avoided. This light-proof water-based varnish is excellently suited to light coloured cork.
The overall consumption lies at around at least 360g/m². An interim sanding is generally carried out before the final coat.
Final hardness is achieved after 5 days (at 20°C and 55% humidity).
Areas of application: Offices, kindergartens, schools, public buildings.
All drying times given are based on 20° C and 55% rel. humidity.
You want to know more? Just give us a call and we will be pleased to answer your questions. (Hotline 0049-(0) 8282 8944-0)