IRSA Lackfabrik Irmgard Sallinger GmbH


IRSA Nature Line - Oils and Waxes

The oils and waxes of IRSA Nature Line

provide natural protection for the beauty of wood, cork and other surfaces. And they do even more than this. They enhance the surface and ensure a comfortable and healthy atmosphere to live in. With attractive colours, the surfaces both inside and outside can be designed to individual taste.


Jewish Museum, Berlin
In the newly renovated old building of the Jewish Museum in Berlin, 3000m² of solid oak stave parquet flooring have been refined using IRSA Natura Hard Oil. The product is solvent-free and gives a particularly pleasant glow to the wood.

Recognized as ecologically safe building material:
All finishes of the IRSA Nature Line are based on natural raw materials such as e.g. vegetable waxes and ethereal oils. They are free from biocides and toxic substances and are therefore recognized as environmentally compatible building material.

Quick and easy to use oils and waxes:
In IRSA's development laboratories, the products are all subjected to constant controls and are continually improved to conform to the latest state of technology and consumer requirements. The success can be seen when using the products and in their excellent long-term effects. Rapid drying times and excellent hard-wearing properties are a distinguishing feature of our products.

Good for floors, walls, ceilings and other:
Whether parquet, wood floors, wall claddings or furniture, the oils from IRSA Nature Line are suitable for wood and cork surfaces, both inside and outside. Our oils and waxes also protect other materials e.g. cotto and slate from dirt and water. Floors remain firm under foot, anti-static and breathe actively. A healthy room climate is thus ensured.

The gentle and proper care for oiled and waxed surfaces:
In order that the beauty of wood, cork and other surfaces treated with our oils and waxes is maintained for a long time, these should be properly cared for and cleaned. According to the surface appearance required, we provide the right maintenance oil and hard wax, as well as care and cleaning agents for easy wipe-over care, all tailored to coordinate with our oils and waxes.

IRSA Oils are suitable for surfaces subject to normal to very heavy wear

We have selected a few products from our broad range




DIBt-Zulassungsnummer: Nr. Z-157.10-32

IRSA Natura Hard Oil


is an oil which is free from resin and solvents, with high filling power, good penetration capacity and with very good water resisting properties. The colour of the wood is given a rich warm enhancement and intensification.

Depending on the type of wood and the lay of the floor, apply 1-3 times wet in wet with IRSA applicator brush (about 120 g/m2 per application until surface is completely saturated - interim drying time is12 hrs).), after approx. 40 minutes remove with IRSA hard oil wiper and polish the surface.

Surplus oil should always be completed polished away.

The floor can be waxed again with Natura hard wax.


DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA Hard Oil Rapid


is an oil which contains resins and mild solvents, with excellent dirt and water resistant properties. The oil dries faster than the Natura Hard Oil. The colour of the wood, cork or bamboo is given a light enhancement and intensification.

According to the absorptive capacity of the wood apply 1 -2 thin coats of IRSA Hard Oil Rapid until the wood is completely saturated. (Interim drying time 12 hrs).

Surplus oil should always be completed polished away.

If required, polish afterwards with Natura hard wax or maintenance oil.


DIBt-Zulassungsnummer: Nr. Z-157.10-92

IRSA HP-Oil High-Protection

IRSA HP-OIL High Protection is universally applicable for hard-, soft-, or exotic indoor woods subjected to normal or very tough wear, e.g. parquet, OSB boards, halls, industrial parquet, wood block, stairs, furniture, sill plates, shelves, window sills, also suitable for cork, bamboo or cotto (testing advisable).

With IRSA HP-OIL High Protection (colorless) the colour of the wood only gets slightly intensified.

According to the absorptive capacity of the wood apply 1 -2 thin coats (about 60 g/m2) of IRSA HP-OIL High- Protection until the wood is completely saturated. (Interim drying time 12 hrs).

Polish away any possible excess HP-OIL High-Protection so that the surface is residue-free.

Curing time is approx. 6 days. If desired then a waxing can be carried out.

IRSA Natura Hard Wax

colourless, coloured

This solid or liquid gloss wax is used for oiled surfaces as a basic protection and for further maintenance treatment.

Apply the material in one or two coats to the pre-oiled surface and polish up immediately when dry.


DIBt-Zulassungsnummer: Nr. Z-157.10-31

IRSA Design-Colour Oil

Color examples. Other colors on request.

Colours: black, white, pine, walnut, light grey, dark grey, light sand and light oak. Other colours are available on request.

is a coloured oil suitable for wooden surfaces, parquet, cork and other absorbent surfaces.


  • effective in regulating dampness
  • stain resistant
  • good penetrating properties
  • UV-resistant
  • gives the surface lustre
  • very little odour during application
  • odourless after it has dried

Total consumption:depending on the absorptive capacity of the base coat approx. 75 - 120 g/m² for 1 - 2 coats

(until the wood is completely saturated.)

Interim drying time 12 hrs.

Surplus oil should always be completed polished away.

Fully useable (lay carpets, place furniture) after approx 7-10 days.

Certified according EN 71-3IRSA Design Color-Oil contains natural raw materials; vegetable oils and resins, also isoaliphalic hydrocarbons, is free of biocide and toxic substances. VOC: 2004/42/2 A(f)700;700 g/l <700 g/l.

IRSA Exotic Wood Oil (light dark-brown) + IRSA Wood Oil (different colours)

(IRSA Wood Oil: different colours like white, sand-grey, larch, beige, platinum-grey, copper-brown, magenta, pigeon-blue, preferably for non-exotic timber)

IRSA Exotic Wood Oil protects exotic woods (e.g. Bangkirai, Ipe, Iroko, Mahogany, Meranti, Nyatoh, Robble, Jarrah, Belinga) but is also suitable for Douglas fir, robinie, oak, larch and cedar.

IRSA Exotic Wood Oil contains robust weather resistant oils and micro fine pigments. UV rays are blocked so effectively that the wood is protected from damage.

IRSA Exotic Wood Oil is free from, poisonous substances and is odourless when dry.

IRSA Exotic Wood Oil enhances the natural colour of the exotic wood without causing any major change in its natural colour tone.

IRSA (Exotic) Wood Oil is not film-forming and therefore offers excellent wear and tear properties for terrace flooring (no coat-forming - no wear and tear). The surface remains open-pored and the wood can breathe. For this reason it can be repainted in part and without an intermediate sanding.

Areas of application: for exotic wood out-doors such as terrace flooring, wooden decking, carports, garden furniture and yachts.

IRSA Wood Oil is available in the following colours: colourless/white, purple/ox blood, pigeon blue, papyrus white, sand grey, platinum grey, larch, copper brown (REMAINING STOCK)

colourless, white, blue grey, light grey, warm grey, dark grey, tobacco brown, rust colored, dark green, larch.

Color examples. Other colors on request.

The drying times given are based on normal conditions (+20°C and 55% humidity)

A test coat should generally be carried out.

Further details can be found in our Technical Data Sheets (Download).